Solenoid operated spool valve, stainless WDMFA06_K9

Solenoid operated spool valves direct operated NG6

Direct operated solenoid spool valve with 4 connections in 5 chamber design. With the solenoids deenergised, the spool is held in the center position by the spring (4/3), or switched back to the offset position (4/2). With the impulse spool (4/2), the spool is held in the switching position by the detent.

Switching valves Solenoid operated spool valve, stainless WDMFA06_K9
  • Flange construction
  • 4/2-way impulse execution, detented
  • 4/3-way with spring centred mid position
  • 4/2-way with spring reset
  • Qmax = 50 l/min
  • pmax = 350 bar

Application

Spool valves are mainly used for controlling direction of movement and stopping of hydraulic cylinders and motors. The direction of movement is determined by the position of the spool and its symbol. The stainless execution is especially suitable for the use in wet and salty environment.