Parameterisation software for SD7, DSV, MD2, PD2 and MKY

The parameterisation software PASO serves for the parameterisation and diagnosis of all electronic cards of the SD7, DSV, MD2, PD2 and MKY type of Wandfluh. The software provides a user interface,

through which by means of a keyboard or a mouse all adjustments can easily be carried out. The communication with the Wandfluh electronics takes place through a USB interface.

System requirements

To be able to correctly utilise the parameterisation software PASO, a PC with the following requirements has to be available:

  • Operating system Windows 7, Windows 10 or higher
  • Standard VGA or higher graphics card, minimum resolution 1425 x 800
  • At least 1 serial USB interface (USB 1.1 or USB 2.0)
  • USB cable:
    - type A => Mini B for DSV
    - type A => B for all other devices
  • Wandfluh own USB adapter PC - PD2 (only for communication with PD2 / MKY)
Download and installation


The PASO software can be downloaded via the Internet free of charge.

The installation of the parameterisation software PASO is then carried out by executing the file "setupPaso.exe". An installation program takes over the complete installation of PASO. For this, the Windows Installer must be installed. This is normally a part of the Windows Environment. If not, the Windows Installer can be downloaded from the Microsoft Website.

If there is already a PASO software installed on the PC, an update will automatically be carried out.

DOWNLOAD setupPaso.msi