Non-return valves, pilot operated non return valves, shuttle valves, pipe failure valves, drain valves, 3-way shifting valves NG10
Pipe failure valve NG10 for line mounting. The valve is screwed directly into the component which has to be protected. Thread size for port A: male G1/2". For port P: female G3/8" for type RBSG1012 or female G1/2" for type RBSW1012. This pipe failure valve is available in a straight version and in a 90° version. Housing and banjo bolt are zinc coated.
Pipe failure valve
for installation in pipes
- Qmax = 30 l/min
- pmax = 210 bar
Pipe failure valves are used where loads must be protected against uncontrolled lowering after a line rupture, for exemple in scissor lifts or leveling platforms. Caution: Pipe failure valves are nor suitable for appli-cations where pressure and flow changes rapidly under normal working conditions.